How to install hot and cold water pipes of faucets?

How to install hot and cold water pipes of faucets?

Nowadays, household faucets are generally made up of two outlets, one is hot water, the other is cooling water, and it can control the size of water flow. It is a kind of sanitary ware that we can't do without when we wash and gargle. How should this kind of faucet be installed? Because sometimes like some small pieces at home, in fact, as a boy to be able to repair, there will inevitably be some problems during the use, which need to be disassembled, inspected and installed, so we should learn to install the hot and cold faucets. In addition, the selection of faucets is not always important. What materials are there?

Faucet is a kind of control switch, which can make our life more convenient. Of course, the most common double faucets are not one faucet. Hot and cold faucets are very common. In daily life, hot and cold faucets are frequently used, and they are very convenient to use. In winter, hot water can be used to wash vegetables and cook meals. Then, we will introduce the installation method and material classification of hot and cold faucets.

 installation method of hot and cold water tap

When installing hot and cold water faucets, first check which side is hot water and which side is cold water. Generally, it is hot on the left and cold on the right. When installing, you can wrap a few circles of waterproof tape on the joint to prevent water leakage. Then screw the faucet on the interface and turn on the switch to check whether the direction of hot and cold water is normal, whether the water flow is normal and whether there is water leakage.

 The installation of hot and cold faucets for water tanks is relatively simple. Generally, there are only two hoses. You can put the copper buckle and a rubber pad into the two hoses. Then put two pipes out of the hole of the vegetable washing tank at one end, so that the rubber pad is put into the hose, and then the copper wire is put in, and then the tap is taken, and the pipe is screwed on the tap. Finally, it is put into the hole of the vegetable washing tank, and the tap is fixed with the copper buckle. Finally, the two pipes are connected to the water outlet.

Classification of materials for hot and cold faucets

 1. Copper faucet

The quality of copper faucet is better, which is more suitable for the material of faucet.

2. Ceramic faucet

Ceramic faucet is not rusty, oxidation and easy to wear.

3. Iron faucet

 The iron faucet is easy to rust, with rough appearance and difficult surface treatment.

4. Zinc alloy faucet

 Zinc alloy faucet is smooth and flat inside. This kind of faucet is harmful to human body. The shell is easy to be corroded and fractured after water impact, and the surface is white after grinding.

5. Stainless steel faucet

 Stainless steel faucets are resistant to acid and alkali and are not easy to be corroded. However, the hardness, toughness and cutting process of stainless steel faucets are more difficult than those of copper faucets, and the cost is high.